Marble floors are one of the popular choices for homeowners when it comes to flooring as it enhances the appearance of their home and increases its value by making it luxurious. However, a large amount of foot traffic can cause these floors to become dirty and prone to having stains after some time. 

Due to this, many homeowners would therefore like to find out if they can polish their marble floors themselves so their floors can be shiny again. We have provided a detailed step by step guide to marble floor restoration to help you restore your marble floors yourself: 

 

Step 1: Clean Your Marble Floors

The first step in restoring marble floors is removing all signs of dirt by using a broom, mop, or vacuum cleaner. After this, use mild soap, castile soap, or detergent to remove any remaining dirt as long as it doesn’t damage the marble. A soft cloth can be used to apply the cleaning solution to the stains and dirt on the floor to prevent scratches. Alternatively, a mop dipped in the soap solution can be used to mop up the dirt. 

For stains that couldn’t be removed using detergent or soap, a helpful marble polishing tip is to use a mixture of baking soda with water. This mixture should be left overnight on the stain, so it is absorbed before being wiped off. 

 

Step 2: Buff The Surface 

A soft cloth can be used for buffing the marble, especially to remove small scratches and other marks. Simply wipe the floor in a circular pattern until the scratches are no longer visible. However, be sure not to apply too much force as this is a mistake to avoid when doing DIY marble polishing. Continue buffing the surface until the marble becomes smooth and shiny.

 

Step 3: Apply Poultice To Remove Stains 

If any liquids like oil, coffee, wine, lime juice are spilled on the floor, they should be mopped immediately so they don’t get deeply embedded. For deeper stains that cannot be removed by buffing, one marble polishing method is to apply poultice. 

Normally, poultice is created by mixing baking soda with water. This is spread over the stained area and covered with a plastic sheet. The poultice should be allowed to remain overnight on the stain so that it can absorb it. Once the poultice dries, it can be wiped off. If the stain remains despite being cleaned with poultice, you may need to let the poultice sit for a longer period until the stain becomes lighter. Otherwise, you may need to rely on the marble polishing steps taken by professionals.

 

Step 4: Polish Your Marble Floors 

For those who have signs that they require marble polishing, polish or polishing powder is often used. Sometimes, the polishing powder is mixed with water and applied to the floor with a soft cloth. Since a marble floor tends to have lots of scratches and etch marks, polishing powder paste should be applied gently to prevent the formation of new scratches. 

Be sure to also move the cloth in a circular pattern around the scratches to remove them and so the floor is smooth. If you are unsure of how to go about polishing your floors by yourself, one of the benefits of engaging a professional floor polishing is they can polish your floors efficiently as they have the skills and knowledge.

 

Step 5: Wipe Your Marble Floors 

Once your marble floors have been polished, wipe off any remaining polishing powder or paste. A sponge dipped in water can be used to clean any scratches that are still present to prevent residues. Once this is done, dry the marble floor using a dry cloth.

 

Step 6: Seal Your Marble Floors 

Since marble is a porous stone, it can get stained easily. To protect marble floors from stains, moisture, and dirt, most experts recommend applying a sealant to form a protective layer. Take note that there are a wide variety of DIY marble polishing products available which vary in quality, chemical composition, and price. Thus, it is advisable to consult an expert and check reviews, so you know what sealant to apply. Usually, an impregnating sealant is used for marble floors to prevent stains from developing. 

Depending on the amount of foot traffic and how dirty the floor gets; sealant can protect a marble floor for at least one or two years. Some sealants can be sprayed on the floor while others should be applied in layers. As such, make sure to read and follow the instructions provided by the sealant manufacturer. The sealant should not be mixed with water or moisture as this could become a reason for why DIY marble polishing isn’t effective. 

 

Step 7: Wipe Everything Off 

One myth about marble polishing is that you can leave the sealant for as long as you want. Remember that some spray-type sealants should be wiped off within 20 minutes, so they don’t sit too long on the floor. Otherwise, streaks may form on the surface. In case the sealant is supposed to be applied in layers, it could take at least 12 hours to harden. The next layer of sealant should only be applied after the first layer hardens. Once it does, use a soft cloth to wipe off any excess sealant. 

 

Engage DW Floor Polishing For Quality Marble Restoration Services 

While the above steps can be used to restore marble flooring, most people in Singapore have a very hectic daily schedule and don’t have enough time to do marble restoration or marble polishing process themselves. Hence, it is advisable to hire DW Floor Polishing, a one stop floor polishing service provider offering floor polishing services in Singapore. They have received many positive reviews from their customers for the projects they’ve done. Their staff is also well trained and will complete the restoration of your marble floors efficiently so that it becomes shiny again.  

 

Conclusion

Remembering the steps mentioned above will help you restore your marble floors, so it looks good as new again. First, make sure to clean your marble floors to remove any remaining dirt. After that, buff your marble floors until there are no more scratches and then apply poultice to remove stains. You can then proceed to do polishing for your marble floors until they become smooth. Once this is done, wipe off any remaining polishing paste and seal your marble floors with the right sealant. Remember to wipe off all sealant tracings afterwards so that streaks don’t form.

For reliable marble restoration services, contact DW Floor Polishing Singapore.

 

DW Floor Polishing Singapore is your trusted floor polishing and floor care specialist – providing reliable professional floor polishing and floor deep cleaning services for all types of floors such as marble, wood, vinyl, and tile. Our services range from marble floor polishing, wood floor polishing, parquet floor polishing, and tile floor polishing. Moreover, you can also trust us to provide quality floor cleaning, vinyl floor deep cleaning, tile floor deep cleaning, and terrazzo floor cleaning. We also provide other services such as timber decking, balcony decking, wood varnishing, door varnishing, and epoxy grouting services – all at a reasonable price. We pride ourselves in providing our customers with the best services to meet your every floor polishing and cleaning needs. 

DW Floor Polishing Singapore is a company that is built on trust, with a track record of successful projects and positive reviews. Feel free to contact us via WhatsApp at +65 8241 0032 for any queries. Alternatively, you can browse our articles for a myriad of information about every type of floor.